Narrow base RH speed governor with limit switch.
200 or 300 mm pulley with test groove.
It is both mono and bidirectional and may be applied to the cab’s safety gear or to the counterweight.
Rated speed:
RH200 – 0,30 to 1 m/s
RH300 – 0,40 to 1 m/s
TUV approved according to the lift safety regulations: EN 81-20: 2014 – EN 81-50: 2014 – EN 21-50: 2018.
Narrow base RG speed governor with limit switch.
200 mm pulley with test groove.
It is both mono and bidirectional and may be applied to the cab’s safety gear or to the counterweight.
Rated speed: 0,15 – 0,30 m/s
TUV approved according to the lift safety regulations: EN 81-20: 2014 – EN 81-50: 2014 – EN 21-50: 2018.
Accessories:
remote control; this configuration does not allow to use the cover.
RC is the new centrifugal speed governor under Montanari brand.
This typology of speed governors stands out for the silence and the accuracy of the intervention. This is due to the electric contact that is managed separately.
RC is both mono and bidirectional and operations can be downward and upward, instantaneous or progressive.
Rated speed from 1,6 to 4,2 m/s.
It may be applied to the cab’s safety gear or to the counterweight, on rope and on hydraulic systems.
RC range:
Pulley: 200 – 300 mm
Narrow or standard base
With test groove
Through the anticreeping system, the new RC Montanari speed governor is a device for detecting the uncontrolled movements of the cab as well as the safety gear activation in full compliance with the lift safety regulations: EN 81-20: 2014 – EN 81-50: 2014 – EN 21-50: 2018.
Accessories:
Anticreeping
Encoder
Phonic wheel
Remote control
Top performance for the super new RQ-A Montanari speed governor.
Operations can be downward and upward, instantaneous or progressive.
Wide intervention range, suitable also for Home Lift: rated speed from 0.15 to 3.0 m/s.
The new RQ-A may be applied to the cab’s safety gear or to the counterweight, on rope and on hydraulic systems.
RQ-A range:
Pulley: 200 – 250 – 300 mm
Narrow or standard base
With test groove
Lowered version: H 300 mm (RQ-A 200)
Through the anticreeping system, the new RQ-A Montanari speed governor is a device for detecting the uncontrolled movements of the cab as well as the safety gear activation in full compliance with the lift safety regulations:
EN 81-20: 2014 – EN 81-50: 2014 – EN 21-50: 2018.
The phonic wheel, equipped with an inductive sensor, can replace the traditional floor sensors in the lift shaft in order to manage the slowing down and the positioning of the cab.
It also determines the cab speed in emergencies through the cab driven to the floor.
Accessories:
Anticreeping
Encoder
Phonic wheel
Remote control
NOR speed governor with 300 mm pulley and test groove.
It is both mono and bidirectional and may be applied to the cab’s safety gear or to the counterweight.
Rated speed:
0,30 to 0,44 m/s
0,45 to 1,50 m/s
TUV approved according to the lift safety regulations: EN 81-20: 2014 – EN 81-50: 2014 – EN 21-50: 2018.
Accessories:
cover
carter protection
100
99
98
97
